Audiovox PAV-1 Cassette Player user guide

2 seconds to scan the 6 stations pre-set into the memories on the

AM or FM bands in the selected direction. The unit will stop at each pre-set station for 5 seconds before continuing to the next pre-set station. Press the button again momentarily to stop

Pre-Set Scan operation and remain on the selected frequency. bo LIQUID CRYSTAL DISPLAY PANEL

VIDEO MONITOR

The Liquid Crystal Display (LCD) panel displays the frequency and activated functions of the radio, tape player and optional CD changer. It also provides the color video monitor function for the auxiliary video input. bp DISPLAY COLOR CONTROL bq DISPLAY TINT CONTROL br DISPLAY BRIGHTNESS CONTROL

These controls are used to adjust the picture quality during auxiliary video input modes. The Color control will adjust the level of color intensity. The Tint control will adjust the level of green or red in the picture. The Brightness control will make the picture brighter or darker.

NOTE:The Color and Tint controls are not functional during

AM/FM radio, tape and CD changer modes. The Brightness control is functional in these modes. display screen. The button is located behind the front panel so the panel must be lowered by pressing the tape Eject button or the Display Angle Control to access it. Each press of the button will change the screen color in the following order:

BLUE GREEN RED BLACK bt DISPLAY ANGLE ADJUSTMENT (

This button is used to set the angle of the display panel for the best viewing. Each tap of the button will adjust the angle by approximately 8 up to the maximum angle. If the button is held, the display will continue to open to the maximum position.

Pressing the button when the display is at the maximum angle will return it to the closed position.

NOTE:The front panel will automically return to the closed position when the ignition is turned off. bu DISPLAY RECALL (DISP)

The Display Recall function is used to recall the function and volume setting display after they have disappeared from the screen during Auxiliary video input modes. Pressing the button will bring these displays back to the screen for 5 seconds. cl CASSETTE DOOR

To access the cassette door, press the Eject button the panel drops to its lowered position (this function will operate when the unit is turned off if the ignition switch is "on"). Hold the

DISPLAY BACKGROUND COLOR SELECTOR (BGCL) cassette with the exposed tape edge to the right and insert it fully

This function is used to select the background color of the into the cassette door until the soft-loading mechanism draws

the cassette in and play begins (the TAPE , cassette symbol,

PLAY and direction arrow will appear on the display panel). If the cassette being played requires Metal tape playback equalization, the setting will automatically be selected as indicated by MTL on the display panel. When the cassette reaches the end on the side of the tape being played, the unit will automatically change direction of play as shown by the arrow indications on the display panel.

NOTE:Observe cassette operation cautions in Care and

Maintenance section of this manual. cm FAST-FORWARD BUTTON (

FAST-FORWARD AUTOMATIC MUSIC SEARCH

A momentary press of this side of the button will activate the

Fast-Forward function which will cause the tape to rapidly move in the forward direction of play (FF and will appear on the display panel). To stop Fast-Forward movement, press the Fast-Forward button again or the Program Selector normal play will resume.

Pressing and holding the Fast-Forward side of the button for longer than 2 seconds will activate the Fast-Forward Automatic

Music Search function (AMS-F and will appear on the display panel). The unit will automatically fast-forward to the beginning of the next selection and begin play. To stop Music

Search function at any point, press the button again or the

Program Selector and normal play will resume. cn REWIND BUTTON (

REWIND AUTOMATIC MUSIC SEARCH

A momentary press of this button will activate the Rewind function which will cause the tape to rapidly move in the reverse direction of play (REW and will appear on the display panel).

To stop Rewind movement, press the press the Rewind button again or the Program Selector button and normal play will

Pressing and holding the Rewind side of the button for longer than 2 seconds will activate the Rewind Automatic Music Search function (AMS-R and will appear on the display panel).

The unit will