Frigidaire 6,000 BTU Window-Mounted Room Air Conditioner user guide

Features three different fan speeds, for more cooling flexibility.Customize times to fit your schedule for immediate comfort when you get home. The built in timer allows you to preset the unit to turn on and off in half hour increments.Our air conditioners maintain the preset room temperature, so you will remain comfortable at all times.
All rights reserved.

Air Conditioner Features & Operating Instructions

Air Conditioner Features

TURNS UNIT

SLEEP MODE

ELECTRONIC CONTROL

Before you begin, thoroughly familiarize yourself with the control panel and remote as shown below and all its functions, then follow the symbol for the functions you desire. The unit can be controlled by the touch pad alone or with the remote.

REMOTE TEMP

SENSING INDICATOR

TEMPERATURE/TIME

(some models)

TEMPERATURE

CHECK FILTER

RESET BUTTON

Battery Size: AAA

Warning: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

STANDARD REMOTE

REMOTE SENSING

Operating Instructions

The following instructions represent the Touch Pad, the same instructions can be used for the Remote Control.

TO TURN UNIT ON:

PRESS ON/OFF BUTTON

2009 Electrolux Home Products, Inc.

YOU WILL SEE:

NOTE: The unit will run in energy saver(eco) mode when powered on each time, if last shutdown is in cool or energy saver(eco) mode. In this mode, the fan will continue to run for 3 minutes after the compressor shuts off.

The fan then cycles on for 90 seconds at 10 minute intervals until the room temperature is above the set temperature, at which time the compressor turns back on.

All rights reserved.

Operating Instructions

Operating Instructions

(continued)

TO CHANGE TEMPERATURE SETTlNG:

TO ADJUST FAN SPEEDS:

YOU WILL SEE:

Note: Tap or hold either up (

) or down (

) button until the desired temperature is seen on the display. This temperature will be automatically maintained anywhere between

60 F (16 C) and 90 F (32 C) . If you want the display to read the actual room temperature. See "To Operate on Fan

Only" section on Page 7.

YOU WILL SEE:

PRESS FAN SPEED

TO USE AUTO FAN FEATURE:

YOU WILL SEE:

PRESS FAN BUTTON,

CHOOSE AUTO

2009 Electrolux Home Products, Inc.

Note: Fan starts at Low Speed and adjusts to a higher speeds the room temperature dictates. For example, if the room doesn't get too warm, it will stay at the slowest speed.

If the room temperature rises quickly, such as a door being opened, it will automatically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set temperature. Press the fan speed button to adjust the fan speed manually.

All rights reserved.

Operating Instructions

Operating Instructions

(continued)

TO OPERATE ON FAN ONLY:

MODE BUTTON

YOU WILL SEE:

Note: Use this function only when cooling is not desired, such as for room air circulation or to exhaust stale air on some models. (Remember to open the vent during this function, but keep it closed during cooling for maximum cooling efficiency.) You can choose any fan speed you prefer. (Except Auto Fan).

During this function, the display will show the actual room temperature, not the set temperature as in the cooling

YOU WILL SEE:

COOL FEATURE:

Note: In this mode, the fan remains on all the time.

MODE BUTTON

CHOOSE COOL

SLEEP FEATURE:

YOU WILL SEE:

SLEEP BUTTON

2009 Electrolux Home Products, Inc.

Note: In this mode the selected temperature will increase by 2 F 30 minutes after the mode is selected. The temperature will then increase by another 2 F after an additional

30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed. The "Sleep" mode program can be cancelled at any time during operation by again pressing the "Sleep", mode, power button or ( ) and ( ) buttons.

All rights reserved.

Operating Instructions

Operating Instructions

(continued)

TIMER: DELAY STOP / START FEATURE

UP/DOWN BUTTONS

YOU WILL SEE HOW MUCH TIME IS CHOSEN:

TIMER BUTTON

Note: For Delay Stop, the unit must be in the On position

Note: For Delay Start, the unit must be in the Off position.

First, Press TIMER button, then adjust timer setting, tap or hold the UP arrow (

) or the DOWN arrow (

) to change delay timer at 0.5 hour