Frigidaire 8,000 BTU Portable Room Air Conditioner with Dehumidifier Mode user guide

Customize times to fit your schedule for immediate comfort when you get home and preset the unit to turn on and off in half hour increments.Keep your home comfortable by removing excess moisture from the air.Capture dust from the air and keep your air conditioner working efficiently with our easy-to-clean washable filter.
5FNQFSBUVSF

'JMUFS 1PXFS

3FTFU RQRII

/PUFiIFBUwNPEFJTGPSIFBUDPPMNPEFMTPOMZ

Operating Instruction

1SFTTUIFiNPEFwCVUUPOVOUJMUIF$PPMNPEFJOEJDBUPSMJHIUT

1SFTTUIFGBOTQFFECVUUPOUPDIPPTFUIFGBOTQFFEBDDPSEJOHUPUIFJMMVNJOBUJPOPGUIFGBOTQFFEJOEJDBUPS

:PVDBODIPPTFUIFiIJw iNFEw iMPXw PSiBVUPwGBOTQFFETFUUJOH

1SFTTUIFiwPSiwCVUUPOUPDIPPTFUIFUFNQFSBUVSFZPVXBOU

Operating Instructions

Press the mode button until the Dry mode indicator lights. In this mode, the or button is disabled and the screen displays the room temperature. The unit will continuously drain moisture from the room.

Note: In this mode, the fan speed will be set as low automatically, which cannot be changed.

In this mode, condensate drainage are required, refer to the "Drainage Instructions" on Page 16-17 for more instructions to drain the excess condensate.

Press the mode button until the Fan mode indicator lights.

In this mode, you can select fan speed hi, med or low.

The screen displays room temperature.

Note: In this mode, the air exhaust hose does not need to be connected.

Heat mode(For Heat & Cool models only)

Press the mode button until the Heat mode indicator lights.

Press the or button to choose the temperature you want.

Press the "fan speed" button to choose the fan speed according to the illumination of the fan speed indicator.

You can choose the hi, med, low, or auto fan speed setting.

Note: The unit have a build in condensate pump to pump out the excess condensate during heating mode.

Condensate drainage are required, refer to the "Drainage Instructions" on Page 16-17 for more instructions to drain the excess condensate.

Operating Instructions

Press the mode button until the AUTO mode indicator lights.

Press the or button to choose the temperature you want. The screen will display the setting temperature.

In this mode, the unit will automatically select cooling, heating(not applicable for cooling only models), or fan only operation depending on what temperature you have selected and the room temperature. The air conditioner will control room temperature automatically round the temperature point set by you.

Note: In this mode, fan speed cannot be selected.

Timer mode

The timer facilitates the user to delay the unit startup or shutdown.

How to delay startup

Plug in the unit, so the unit turns to standby.

Press the timer button, then the Timer indicator and number of hours on the screen will light.

Tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay start timer at 0.5 hour increments up to 10 hours, then at 1 hour increments up to 24 hours.

After 5 seconds, the setting will be confirmed automatically and the control will count down the time remaining until startup.

The unit will start up in the mode as previously set. Press the timer button again within 5 seconds, you will quit the timer setting directly.

To cancel the setting, press the timer button again will show the remain time and press the button again to quit the function.

How to delay shutdown

You can delay shutdown when the unit is on.

Press the timer button, then the Timer indicator and number of hours on the screen will light.

Tap or hold the UP arrow ( ) or the DOWN arrow ( ) to change delay shutdown timer at 0.5 hour increments up to 10 hours, then at 1 hour increments up to 24 hours.

After 5 seconds, the setting will be confirmed automatically and the control will count down the time remaining until shutdown. Press the timer button again within 5 seconds, you will quit the timer setting directly.

To cancel the setting, press the timer button again will show the remain time and press the button again to quit the function.

Operating Instructions

Sleep mode

When the unit is in Cool, Heat or Auto mode, you can press the sleep button to make the unit run in Sleep mode.

In this mode, the fan speed will be set as auto automatically, which cannot be changed.

In Cool/Heat mode the selected temperature will increase/decrease by 2 F 30 minutes after the mode is selected.

The temperature will then increase/decrease by another 2 F after an additional 30 minutes. This new temperature will be maintained for 7 hours before it returns to the originally selected temperature. This ends the "Sleep" mode and the unit will continue to operate as originally programmed.

The "Sleep" mode program can be cancelled at any time during operation by pressing the "Sleep", mode, fan speed or onoff button.

Note: In Fan or Dry mode, Sleep mode cannot be set.

During Sleep mode the brightness of the indicators will reduce by half.

Louver Swing Function

Press the swing button to enable louver swing function, the swing indicator will illuminate and the louver on the top panel will swing up and down. Press this button again to disable the louver swing function.

Filter reset

This feature is a reminder to clean the Air Filter (See Care and Cleaning) for more efficient operation.

The filter indicator will illuminate after 250 hours of fan operation. Press the filter reset button, to reset after cleaning the filter.

Press the and button the same time for more than 3 seconds to switch between degree Fahrenheit and degrees Celsius.

Note: Under Dry/Fan mode, you can not select F/C.

Operating Instructions

Remote Control

Cool Only models

3FNPUF$POUSPMTDSFFO

5FNQ5JNFSTFUUJOHCVUUPO

5JNFSCVUUPO

Heat and Cool models

RQRIIEXWWRQ

'BO4QFFECVUUPO

4XJOHCVUUPO

4MFFQCVUUPO

Battery Installation and Impor