GE Profile™ 30" Built-In CleanDesign Electric Cooktop JP910KKCC user guide

Heating element "On" light.
? Be careful when placing spoons or other to this. Please see the Cleaning the Glass stirring utensils on glass cooktop surface

Cooktop section. when it is in use. They may become hot

? When the cooktop is cool, use only and could cause burns.

CERAMA BRYTE Ceramic Cooktop

Cleaner and the CERAMA BRYTE

? Avoid heating an empty pan. Doing so may

Cleaning Pad to clean the cooktop. damage the cooktop and the pan.

Care and Cleaning

Operating Instructions

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

? Do not allow water, other liquids or grease to remain on the cooktop.

? To minimize the possibility of burns, always be certain that the controls for all surface elements are at the off position and the entire glass surface is cool before attempting to clean the cooktop.

Troubleshooting Tips

? Do not operate the glass surface elements if the glass is broken. Spillovers or cleaning solution may penetrate a broken cooktop and create a risk of electrical shock.

Contact a qualified technician immediately should your glass cooktop become broken.

? To avoid possible damage to the cooking surface, do not apply the cleaning cream to the glass surface when it is hot.

? After cleaning, use a dry cloth or paper towel to remove all the cleaning cream

? Read and follow all instructions and warnings on the cleaning cream labels.

? Use care when touching the cooktop. The

glass surface of the cooktop will retain heat after the controls have been turned OFF.

? Do not stand on the glass cooktop.

? Large scratches or impacts to glass cooktops can lead to broken or shattered glass.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

Throughout this manual, features and appearance may vary from your model.

Safety Instructions

Features of your cooktop.

Operating Instructions

Care and Cleaning

Feature Index (Features and appearances may vary.)

Explained on page

Dual Surface Element

Tri-Ring Surface Element

Left Rear Surface Element Control Knob

Left Front Surface Element Control Knob

Control Lock Indicator Light

Surface Element ON Indicator Light

Center or Tri-Ring Surface Element Control Knob

Tri-Ring Cooking Area Selector Knob

Dual Element Control Knob

Dual Element Selector Knob

Right Rear Surface Element Control Knob

Control Lock Knob

Left Front and Bridge Element

Bridge Element Selector Knob

Consumer Support

Troubleshooting Tips

Radiant Surface Elements

Throughout this manual, features and appearance may vary from your model.

Operating Instructions

Safety Instructions

Features of your cooktop.

Troubleshooting Tips

Care and Cleaning

Consumer Support

Feature Index (Features and appearances may vary.)

Explained on page

Radiant Surface Elements

Dual Surface Element

Left Rear Surface Element Control Knob

Left Front Surface Element Control Knob

Control Lock Indicator Light

Surface Element ON Indicator Light

Dual Element Control Knob

Dual Element Selector Knob

Right Rear Surface Element Control Knob

Control Lock Knob

Left Front and Bridge Element

Bridge Element Selector Knob

Throughout this manual, features and appearance may vary from your model.

How to Set

Push the knob down and turn in either direction to the setting you want. When the control is in any position other than

OFF, it may be rotated without pushing

The controls for the radiant surface elements can be set anywhere between

LO and HI for an unlimited number of heat settings. With the infinite switch the element cycles on and off to maintain your selected control setting.

A HOT SURFACE indicator light will glow when any radiant element is turned on and will remain on until the surface is cooled to approximately 150F.

? It comes on when the element is hot to the

? It stays on even after the element is turned off.

? It glows brightly until the element is cooled to approximately 150F.

? Be sure you turn the control knob to OFF when you finish cooking.

;;;;;;;;;;;;;

;;;;;;;;;;;;

; ;;;; ;;;

;; ;;;;;;;;

Never cook directly on the glass.

Always use cookware.

NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.

NOTE: On models with light colored glass cooktops, it is normal for the cooking zones to change color when hot or cooling down. This is temporary and will disappear as glass cools to room temperature.

? Water stains (mineral deposits) are removable using the cleaning cream or full strength white

? Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

? Dont store heavy items above the cooktop.

If they drop onto the cooktop, they can cause

? Do not use the surface as a cutting board.