GE Profile Performance™ 36" CleanDesign Cooktop JP960BABB user guide

One 7" (1500W).
Stirring utensils on glass cooktop surface

Cooktop section. when it is in use. They may become hot

? When the cooktop is cool, use only and could cause burns.

CERAMA BRYTE Ceramic Cooktop

Cleaner and the CERAMA BRYTE

? Avoid heating an empty pan. Doing so may

Cleaning Pad to clean the cooktop. damage the cooktop and the pan.

Care and Cleaning

Operating Instructions

Safety Instructions

IMPORTANT SAFETY INFORMATION.

READ ALL INSTRUCTIONS BEFORE USING.

? Do not allow water, other liquids or grease to remain on the cooktop.

? To minimize the possibility of burns, always be certain that the controls for all surface units are at the off position and the entire glass surface is cool before attempting to clean the cooktop.

Troubleshooting Tips

? Do not operate the glass surface units if the glass is broken. Spillovers or cleaning solution may penetrate a broken cooktop and create a risk of electrical shock.

Contact a qualified technician immediately should your glass cooktop become broken.

? To avoid possible damage to the cooking surface, do not apply the cleaning cream to the glass surface when it is hot.

? After cleaning, use a dry cloth or paper towel to remove all the cleaning cream

? Read and follow all instructions and warnings on the cleaning cream labels.

? Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls have been turned OFF.

? Do not stand on the glass cooktop.

? Large scratches or impacts to glass cooktops can lead to broken or shattered glass.

Consumer Support

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

Throughout this manual, features and appearance may vary from your model.

How to Set

The UNIT ON indicator light will glow when any surface unit is on.

At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.

A HOT SURFACE indicator light will glow when any radiant element is turned on and will remain on until the surface is cooled to approximately 150F.

The controls for the radiant surface units can be set anywhere between LO and HI for an unlimited number of heat settings.

With the infinite switch the unit cycles on and off to maintain your selected control setting.

? It comes on when the unit is hot to the touch.

? It stays on even after the unit is turned off.

? It glows brightly until the unit is cooled to approximately 150F.

The control must be pushed in to set only from the OFF position. When the control is in any position other than OFF, it may be rotated without pushing it in.

;;;;;;;;;;;;;

;;;;;;;;;;;;

; ;;;; ;;;

;; ;;;;;;;;

Never cook directly on the glass.

Always use cookware.

NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts and insulating materials and will disappear in a short time.

NOTE: On models with light colored glass cooktops, it is normal for the cooking zones to change color when hot or cooling down. This is temporary and will disappear as glass cools to room temperature.

? Water stains (mineral deposits) are removable using the cleaning cream or full strength white

? Use of window cleaner may leave an iridescent film on the cooktop. The cleaning cream will remove this discoloration.

? Dont store heavy items above the cooktop.

If they drop onto the cooktop, they can cause

Troubleshooting Tips

OFF CENTER

;;;;;;;;;;;

;;;;;;;;;;;

; ;;;; ;;;

;;;;;;;;;;;

Always place;the pan ; in the center of

The radiant cooktop features heating units beneath a smooth glass surface.

? Do not use the surface as a cutting board.

The surface unit will cycle on and off to maintain your selected control setting.

It is safe to place hot cookware from the oven or surface on the glass cooktop when the surface is cool. the surface unit you are cooking on.

Even after the surface units are turned off, the glass cooktop retains enough heat to continue cooking. To avoid overcooking, remove pans from the surface units when the food is cooked.

Avoid placing anything on the surface unit until it has cooled completely.

Consumer Support

;;;;;;;;;;;;

; ;;;; ;;;

;;;;;;;;;;;

;;;;;;;;;;;;

Care and Cleaning

About the radiant surface units

Operating Instructions

Be sure you turn the control knob to OFF when you finish cooking.

Push the knob in and turn in either direction to the setting you want.

Safety Instructions

Using the surface units.

Do not slide cookware across the cooktop because it can scratch the glass. The glass is scratch-resistant, not scratchproof. surface unit surface unit

Operating Instructions

Safety Instructions

Using the surface units.

Dual Surface Unit (on some models)

The right front surface unit has 2 cooking sizes to select from so you can match the size of the unit