GE Profile™ Series 30" Built-In Electric Cooktop PP912BMBB user guide

Frameless design.
May penetrate a broken cooktop and create a risk of electrical shock. Contact a qualified technician immediately should your glass cooktop become broken.

? Clean the cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot surface element, be careful to avoid steam burns. Some cleansers can produce noxious fumes if applied to a hot surface.

? NOTE: We recommend that you avoid wiping any surface element areas until they have cooled and the indicator light has gone off.

Sugar spills are the exception to this. Please see the Cleaning the Glass Cooktop section.

? To avoid possible damage to the cooking surface, do not apply the cleaning cream to the glass surface when it is hot.

? After cleaning, use a dry cloth or paper towel to remove all the cleaning cream residue.

? Read and follow all instructions and warnings on the cleaning cream labels.

? Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls have been turned OFF.

? Do not stand on the glass cooktop.

? Large scratches or impacts to glass cooktops can lead to broken or shattered glass.

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

Features of your 36 cooktop.

Throughout this manual, features and appearance may vary from your model.

PP972, CP650

Feature Index (Features and appearances may vary.)

Explained on page

Single Surface Element

Dual Surface Element

Tri-Ring Surface Element

Left Rear Surface Element Control Knob

Warming Zone Surface Element

Control Lock Indicator Light

Surface Element ON Indicator Light

Center or Tri-Ring Surface Element Control Knob

Dual Surface Element Control Knob

Right Rear Surface Element Control Knob

Control Lock Knob

Left Front and Bridge Surface Element

Bridge/Left Front Surface Element Control Knob

Features of your 30 cooktop.

Throughout this manual, features and appearance may vary from your model.

PP944, CP350

Feature Index (Features and appearances may vary.)

Single Surface Element

Dual Surface Element

Left Rear Surface Element Control Knob

Left Front Surface Element Control Knob

Control Lock Indicator Light

Surface Element ON Indicator Light

Dual Surface Element Control Knob

Dual Surface Element Selector Knob

Right Rear Surface Element Control Knob

Control Lock Knob

Left Front and Bridge Surface Element

Bridge Surface Element Selector Knob

Tri-Ring Surface Element

Explained on page

Tri-Ring Surface Element Selector Knob

Tri-Ring Surface Element Control Knob

Left Front/Bridge Surface Control Knob

Center Rear Surface Element Control Knob

Using the surface elements.

Throughout this manual, features and appearance may vary from your model.

How to Set

Push the knob down and turn in either direction to the setting you want. When the control is in any position other than OFF, it may be rotated without pushing it down.

A HOT SURFACE indicator light will glow when any radiant element is turned on and will remain on until the surface is cooled to approximately 150F.

At both OFF and HI the control clicks into position. You may hear slight clicking sounds during cooking, indicating the control is keeping the power level you set.

? It comes on when the element is hot to the

? It stays on even after the element is turned off.

? It glows brightly until the element is cooled to approximately 150F.

? Be sure you turn the control knob to OFF when you finish cooking.

The controls for the radiant surface elements can be set anywhere between LO and HI for an unlimited number of heat settings. With the infinite switch the element cycles on and off