GE Profile™ 7.0 Cu. Ft. Super Capacity Electric Dryer with Stainless Steel Drum DPSB620ECCC user guide

Five heat selections.
Operating Instructions

? If yours is a gas dryer, it is equipped with an automatic electric ignition and does not have a pilot light. DO NOT ATTEMPT TO LIGHT WITH A

MATCH. Burns may result from having your hand in the vicinity of the burner when the automatic ignition turns on.

? You may wish to soften your laundered fabrics or reduce the static electricity in them by using a dryer-applied fabric softener or an anti-static conditioner. We recommend you use either a fabric softener in the wash cycle, according to the manufacturers instructions for those products, or try a dryer-added product for which the manufacturer gives written assurance on the package that their product can be safely used in your dryer. Service or performance problems caused by use of these products are the responsibility of the manufacturers of those products and are not covered under the warranty to this appliance.

Safety Instructions

WHEN USING YOUR DRYER (cont.)

? Do not tamper with controls.

Troubleshooting Tips

? Do not attempt to repair or replace any part of this appliance or attempt any servicing unless specifically recommended in this Owners Manual or in published user-repair instructions that you understand and have the skills to carry out.

READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.

SAVE THESE INSTRUCTIONS

Consumer Support

You can locate your model number on the label on the front of the dryer, behind the door.

Clean the lint filter.

IMPORTANT: Clean the lint filter each time you use the dryer.

Add clothes. Do not overload. This wastes energy and causes wrinkling.

Operating Instructions

Safety Instructions

Quick Start Guide for Model DPSB620.

Troubleshooting Tips

Select the dry cycle and other

For TIMED DRY, use the SET TIME arrow pads to set the drying time.

NOTE: Any time you make a selection that is incompatible with the chosen dry cycle, the dryer will beep twice.

Consumer Support

Change any of the automatic settings, if desired, by pressing the pad beneath the setting.

? For best performance, adjust load size to appropriate setting

? Dryness level determines how dry your clothes will be at the end of the cycle

? Adjust temperature as recommended on the fabric manufacturers care label

Close the door and press START.

Easy Touch Selections for Model DPSB620.

Safety Instructions

Your new dryer offers the convenience of starting your dryer loads with our EASY TOUCH cycles. Make one simple selection, and your LOAD SIZE, DRYNESS LEVEL and TEMP SETTING are automatically set. Then all you have to do is press START.

For cottons and most linens.

MIXED LOADS

For loads consisting of cottons and poly-blends.

PERM PRESS

For wrinkle-free, permanent press and delicate items, and knits.

For knits with fabric care labels that say Machine Dry.

For lingerie and special-care fabrics.

Operating Instructions

Use to set your own drying time. TIMED DRY is also recommended for small loads.

To use TIMED DRY:

1. Press TIMED DRY.

Troubleshooting Tips

2. Select the drying time.

3. Select the TEMP setting.

4. Select any options. (NOTE: The ANTI-BACTERIAL and EXTEND TUMBLE options are not available with TIMED DRY cycles.)

5. Close door.

6. Push START.

Consumer Support

You can locate your model number on the label on the front of the dryer, behind the door.

Clean the lint filter.

IMPORTANT: Clean the lint filter each time you use the dryer.

Add clothes. Do not overload. This wastes energy and causes wrinkling.

Operating Instructions

Safety Instructions

Quick Start Guide for Model DPSB650.

Select one of the three drying methods:

? Press SENSOR CYCLES to dry according to load type

? Press GARMENT CYCLES to dry according to clothing type

? Press TIMED DRY to specify dry time

Troubleshooting Tips

Select the dry cycle by pressing the arrow pads (

) at the sides of the display. You can scroll up and down through the list of cycles by pressing the

UP ( ) and DOWN ( ) arrow pads beneath the display.

For TIMED DRY, you can use either the display or the SET TIME arrow pads to set the drying time.

NOTE: Any time you make a selection that is incompatible with the chosen dry cycle, the dryer will beep twice.

Consumer Support

Change any of the automatic settings, if desired, by pressing the pad beneath the setting.

? For best performance, adjust load size to appropriate setting

? Dryness level determines how dry your clothes will be at the end of the cycle

? Adjust temperature as recommended