GE® ENERGY STAR® 115 Volt Electronic Room Air Conditioner ATM06LZ user guide

To cancel the set function, press the Timer button again.

USING THE AIR CONDITIONER

6. Eco Button

When the unit is in ECO mode, the light will turn on. In ECO mode, the unit will turn off once the room is cooled to the user-set temperature. The unit will turn back on when the room temperature rises above the user-set temperature. Before the compressor starts, the fan motor will run for a while, then it will stop for a while, and will repeat to provide a much more comfortable feeling and save energy.

7. Sleep Button

Press the SLEEP button, all of the display lights will turn off after a while, but the Sleep light is always on. In SLEEP mode, the air conditioner will automatically adjust the temperature and fan speed to make the room more comfortable during the night. The set temperature will automatically raise every 30-60 minutes, and at most change six times until the set temperature is 81 or 82.

8. Fan Speed Button

Press the FAN SPEED button to choose the fan speed options.

You can choose Hi, Med, Lo or auto speed in COOL mode or choose Hi, Med, Lo in FAN mode.

9. Filter Button hen the Filter Check light is off, it is not necessary to press the

Filter Check button. When the Filter Check light is on, you can turn off the light by pressing the Filter Check button. After the fan motor works for 500 total hours, the Filter Check light will turn on to remind the user to clean the filter.

USING THE AIR CONDITIONER

Features and appearance will vary.

Front View

Air Conditioner Remote Controls

Turns the air conditioner on and off.

Press the Cool button to Cool mode.

3. + and 8VHWKHVHEXWWRQVRQWKHFRQWUROSDQHODQGUHPRWHWR increase or decrease the Set Temperature or Timer.

Temperature range: 61F to approximately 88F (16C to approx. 31C).

Press the Sleep button, all of the display lights will turn off after a while, but the Sleep light is always on. In

Sleep mode, the air conditioner will automatically adjust

the temperature and fan speed to make the room more comfortable during the night. The set temperature will automatically raise every 30-60 minutes and at most, change six times until the set temperature is 81 or 82F.

8VHWKHVHEXWWRQVRQWKHFRQWUROSDQHODQGUHPRWHWRVHWWKH

Timer Off: The timed stop programmed by pressing the

Timer button. Set the rest time by pressing the + or - button until the rest time displayed is to your liking then press the

Timer button again.

Timer On: When the unit if off, press the Timer button a first time, set the temperature by pressing the + or - buttons.

Press the Timer button a second time. Set the rest time by pressing the + or - buttons. Press the Timer button a third time, confirm the setting, then the setting will automatically switch on and will show the change on the display.

NOTE: It can be set to automatically turn off or on in

0.5 - 24 hours. Each press of the + or - buttons will increase or decrease the timer. The Timer can be set on 0.5 hour increments below 10 hours and 1 hour increments for 10 hours or above. The Set light will turn on while setting. To cancel the set function, press the Timer button again.

6. Auto Mode

In Auto mode, the unit automatically chooses the fan speed and the mode of operation (Cool, Dry, or Fan). IN this mode, the fan speed and the temperature are set automatically according to the room temperature (tested by the temperature sensor, which is incorporated in the indoor

7. Fan Speed

Press the Fan Speed button to choose the fan speed options. You can choose High, Medium, Low, or Auto in

Cool mode and High, Medium, or Low in Fan mode.

8. Display

By pressing the Display button, it wil switch off/on all lights on the LED display.

When the unit is in Eco mode, the light will turn on. In Eco mode, the until will turn off once the room is cooled to the user set temperature. The unit will turn back on when the room temperature rises above the user set temperature.

Before the compressor starts, the fan motor will run for a while, then it will stop for a while, and will repeat to provide a much more comfortable feeling and save energy.

10. Fan Only

Press the Fan Only button to activate Fan only mode.

49-5000421 Rev.0

USING THE AIR CONDITIONER

Using the Air Conditioner

Do Not Operate in Freezing Outdoor Conditions

This cool-only air conditioner was not designed for freezing