The separate airflow system minimizes the mixing of air between the two compartments, which reduces fresh food odor transfer to improve the taste of ice.
The ClimateKeeper2 system also reduces the number of defrosting cycles in the freezer evaporator, thereby reducing freezer burn.
*Freezer air is used in the CustomCool feature.
**Testing shows a higher level of humidity in the Fresh Food section in ClimateKeeper2 refrigerators versus conventional units.
About TurboCool. (on some models)
How it Works
TurboCool rapidly cools the refrigerator compartment in order to more quickly cool foods.
Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers.
It can also be used if the refrigerator has been without power for an extended period.
Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34F (1C), then it will cycle on and off to maintain this setting.
After 8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.
How to Use
Press TurboCool. The TurboCool temperature display will show Tc and the LED will be activated.
After TurboCool is complete, the TurboCool indicator light will go out.
NOTES: The refrigerator temperature cannot be changed during TurboCool .
The freezer temperature is not affected during TurboCool .
When opening the refrigerator door during
TurboCool , the fans will continue to run if they have cycled on.
(on some models)
How it Works
The ExpressChill feature is a system of dampers, a fan and a temperature thermistor.
The pan is tightly sealed to prevent the pans temperature from causing temperature fluctuations in the rest of the refrigerator.
The controls for this pan are located in the top of the refrigerator or on the dispenser with the temperature controls.
How to Use
Empty the pan. Place the Chill tray in the pan. Place the items on the tray and close the pan completely.
Select the ExpressChill pad. On some models, you can then select the chill time
(use chart to determine best setting). Other models will only have one option (45 minutes). On models with multiple settings, tap the pad until the light appears next to the desired setting.
?To stop a feature before it is finished, tap that features pad until no options are selected and the display is off.
?During ExpressChill, the display on the controls will count down the time in the
How to Remove and Replace the Drawer
Pull the drawer out to the stop position.
Lock all four swing locks by rotating them to the lock position.
Rotate all four swing locks to the unlock
Lift the front of the drawer up and out.
Make sure all four swing locks are in the unlock position.
Place the sides of the drawer into the drawer supports, making sure the swing locks fit on the drawer slots.
ExpressChill Chart (on some models)
NOTE: Results may vary depending on packaging, s