GE® ENERGY STAR® 25.3 Cu. Ft. Side-By-Side Refrigerator with Dispenser GSH25JGBWW user guide

Never clean condenser.
When moving the refrigerator away from the wall, be careful not to roll over or damage the power cord.

Read and follow this Safety Information carefully.

SAVE THESE INSTRUCTIONS

How to install features. (Not all features are on all models.)

TOP FREEZER SHELF

Make sure the shelf front locks into

FILTER CARTRIDGE

Remove Bypass Plug

DAIRY COVER

Install Filter Cartridge

Top Freezer Shelf

BOTTLE RETAINER

FREEZER DOOR SHELF FRONTS

Make sure that the shelf front locks into position.

NOTE: On dispenser models, the longer shelf fronts go in the top two positions.

ADJUSTABLE

DOOR BIN SNUGGERS

Shelf Front

LOWER FIXED DOOR BINS

Make sure the bin fronts lock into position.

To remove: Lift the shelf extender

straight up, then pull out.

To remove: Lift the front of the bin up, then pull

To replace or relocate:

Engage the bin in the molded supports of the door, and push in. Bin will lock in place.

To replace: Engage the shelf extender in the molded supports of the door and push in. It will lock in

Lower Door Bin

About the shelves and bins. (Not all features are on all models.)

Rearranging the Shelves

Refrigerator Shelves:

To Replace

Lift up and out

Freezer Pan:

Freezer Shelves:

Remove the pan by pulling it forward, lifting up the front and sliding it past the stop location.

Slide-Out Spillproof Shelf (on some models)

The slide-out spillproof shelf allows you to reach items stored behind others. The special edges are designed to help prevent spills from dripping to lower shelves.

NOTE: Make sure you push the shelves all the way back in before you close the door.

Spillproof Shelves (on some models)

Spillproof shelves have special edges to help prevent spills from dripping to lower shelves.

About the crispers and pans. (Not all features are on all models.)

Adjustable Humidity Crispers and Snack Pan (on some models)

Slide the control all the way to the

High setting to provide high humidity recommended for most vegetables.

Slide the control all the way to the Low setting to provide lower humidity levels recommended for most fruits.

Convertible Meat Pan (on some models)

The convertible meat pan has its own cold air duct to allow a stream of cold air from the freezer compartment to flow around

The variable temperature control regulates the air flow from the freezer compartment.

Set control lever up to convert the pan to normal refrigerator temperature and provide extra vegetable storage space. Cold air duct is turned off. Variable settings between these extremes can be selected.

Set control lever down to the coldest setting to store fresh meats. If lever is left in meat position for a long period of time, some frost may form on the inside of the pan.

Crisper Removal

Crispers can easily be removed by tilting up slightly and pulling past stop location.

If the door prevents you from taking out the crispers, the refrigerator will need to be rolled forward until the door opens enough to slide the crispers out. In some cases, when you roll the refrigerator out, you will need to move the refrigerator to the left as you roll it out.

When replacing the crispers, make sure you slide them through the crisper guides.

About the controls on the refrigerator.

Your controls will look like one of the following:

9 IS COLDEST

FRESH FOOD

STEP 1Set Fresh Food Control on 5.

STEP 2Set Freezer Control on 5.

STEP 3WAIT 12 HOURS for temperature to stabilize.

STEP 4If a change is needed, move the control one number at a time and allow 12 hours for temperature to stabilize.

Startup Steps for Proper Temperature Control

REFRIGERATOR