GE Profile™ 24.6 Cu. Ft. Side-by-Side Refrigerator PSIC5RGXCV user guide

Frost guard technology.
Temperature controls. If this film was not removed during installation, remove it now.

Touch-LED Dispenser Control:

To change the temperature, press and release the FREEZER

TEMP/FRIDGE TEMP pad. The SET light will come on and the display will show the set temperature. To change the temperature, tap either the or pad until the desired temperature is displayed.

Once the desired temperature has been set, the temperature display will return to the actual refrigerator and freezer temperatures after 5 seconds. Several adjustments may be required. Each time you adjust the controls, allow 24 hours for the refrigerator to reach the temperature you have set.

The temperature controls can display both the SET temperature as well as the actual temperature in the refrigerator and freezer.

The actual temperature may vary slightly from the SET temperature

Tactile LED Dispenser Control.

The temperature controls are preset in the factory at 37F (3C) for the refrigerator compartment and 0F (-18C) for the freezer compartment. Allow 24 hours for the temperature to stabilize to the preset recommended settings.

Refrigerator temperatures can be adjusted between 34F and 46F

(1C to 8C), and the freezer temperatures can be adjusted between

6F and +8F (21C to 13C).

Performance Air Flow System

The Performance Air-Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the Air Tower along the back wall of the refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall.

Placing food in front of the louvers on these components will not affect performance. Although the Air Tower and the Air

Tunnel can be removed, doing so will affect temperature performance. (For removal instructions, on-line, contact

About Set Features.

This pad is used to select the following features: TurboCool, Quick Ice, Door Alarm and Water Filter. exit the mode. If no key is pressed, the mode will exit and return to displaying features currently set.

Pressing SET FEATURES repeatedly will cycle through all of the available features and then

About TurboCool.

How it Works

TurboCool rapidly cools the refrigerator

compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours.

The compressor will continue to run until the refrigerator compartment cools to approximately 34F (1C), then it will cycle on and off to maintain this setting. After

8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

Tactile LED Dispenser Control:

How to Use

Press TurboCool. The TurboCool temperature display will show Tc and the LED will be activated.

After TurboCool is complete, the TurboCool indicator light will go out.

NOTES: The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during

TurboCool, the fans will continue to run if they have cycled on.

Touch-LED Dispenser Controls:

Press SET FEATURES. The refrigerator temperature display will show TurboCool and/or TC. Press ON/OFF.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during

TurboCool.

About ClimateKeeper2. (on some models)

When opening the refrigerator door during

TurboCool, the fans will continue to run if they have cycled on.

How it Works

The ClimateKeeper2 is the industrys most advanced refrigeration system, delivering optimum temperature and humidity performance to keep food garden fresh longer and re