GE Profile™ 23.1 Cu. Ft. Side-by-Side Refrigerator PSSF3RGZBB user guide

Adjustable slide-out, spillproof glass shelves.
Turning the cooling system off: Tactile-LED Dispenser

On some models, setting both controls to the warmest setting until the display flashes (off) will stop cooling in both the freezer and refrigerator compartments.

On other models, setting either control to the warmest setting until the display flashes (off) will stop the cooling to the freezer and refrigerator.

NOTE: Turning the refrigerator off via the controls on the touch panel does not shut off electrical power to the refrigerator.

Touch-LED Dispenser Control:

Press and release the FREEZER TEMP/FRIDGE TEMP pad.

Press to set freezer temperature to 5. The display will show OFF. To turn the unit back on, press the FREEZER

TEMP/FRIDGE TEMP pad. Press to set the freezer and refrigerator temperatures to the preset points of 0F (18C) for the freezer and 37F (3C) for the refrigerator.

When the unit is turned back on, it will take up to 24 hours to stabilize.

Touch-LED Dispenser Control

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

Performance Air Flow System

The Performance Air-Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the Air Tower along the back wall of the refrigerator and the Air Tunnel on the bottom portion of the freezer rear wall.

Placing food in front of the louvers on these components will not affect performance. Although the Air Tower and the Air

Tunnel can be removed, doing so will affect temperature performance. (For removal instructions, on-line, contact

About Set Features.

This pad is used to select the following features: TurboCool, Quick Ice, Door Alarm and Water Filter.

Pressing SET FEATURES repeatedly will cycle through all of the available features and then exit the mode. If no key is pressed, the mode will exit and return to displaying features currently set.

About TurboCool.

How it Works

TurboCool rapidly cools the refrigerator

compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for eight hours.

The compressor will continue to run until the refrigerator compartment cools to approximately 34F (1C), then it will cycle on and off to maintain this setting. After

8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

Tactile LED Dispenser Control:

How to Use

Press TurboCool. The TurboCool temperature display will show Tc and the LED will be activated.

After TurboCool is complete, the TurboCool indicator light will go out.

NOTES: The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during

TurboCool, the fans will continue to run if they have cycled on.

Touch-LED Dispenser Controls:

Press SET FEATURES. The refrigerator temperature display will show TurboCool and/or TC. Press ON/OFF.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during

TurboCool.

About ClimateKeeper2. (on some models)

When opening the refrigerator door during

TurboCool, the fans will continue to run if they have cycled on.

How it Works

The ClimateKeeper2 is the industrys most advanced refrigeration system, delivering optimum temperature and humidity performance to