GE® ENERGY STAR® 15.5 Cu. Ft. Top-Freezer Refrigerator GIE16DGHWW user guide

Quick door reversal.
Place in the fresh food compartment.

When placed correctly on the shelf supports, the shelf will stop before coming completely out of the refrigerator and will not tilt when you place food on it or remove food from it.

Do not clean glass shelves or covers with warm water when they are cold. Glass shelves and covers may break if exposed to sudden temperature changes or impact such as bumping or dropping.

Tempered glass is designed to shatter into many small pieces if it breaks.

About the freezer compartment shelves.

Freezer Compartment Shelf

When placed correctly on the shelf supports, the two steel wire stationary shelves will stop before coming completely out of the freezer and will not tilt when you place food on it or remove food

Glass Shelves

Some models have glass shelves.

Do not clean glass shelves or covers with warm water when they are cold. Glass shelves and covers may break if exposed to sudden temperature changes or impact such as bumping or dropping.

Tempered glass is designed to shatter into many small pieces if it breaks.

Pull forward

About the storage drawers..

Not all features are on all models.

Snack Drawer

The snack drawer can be moved to the most useful location for your familys

Fruit and Vegetable Drawers

Excess water that may accumulate in the bottom of the drawers should be emptied and the drawers wiped dry.

About storage drawer and cover removal.

Not all features are on all models.

Humidity Controlled Drawer (on some models)

Slide the control all the way to the

HIGH setting to provide high humidity recommended for most vegetables.

Slide the control all the way to the LOW setting to provide lower humidity levels recommended for most fruits.

Drawer Removal

Drawers can be removed easily by grasping the sides and lifting up slightly while pulling drawers past the stop location.

Cover Removal

To remove:

Remove the drawers.

Reach in, push the back of glass cover up, and at the same time, pull it backward as far as it will come.

Tilt it and take it out. Avoid cleaning the cold glass cover with hot water because the extreme

WHPSHUDWXUHGL?HUHQFHPDFDXVHLWWREUHDN

Remove the drawer frame. (Always remove the glass cover before you take out the drawer frame.)

/LIWWKHIUDPHR?WKHVXSSRUWVDWHDFKVLGHDQG back, pull it forward, tilt it and take it out.

To replace:

Lower the frame until it rests on the supports at each side and back.

Replace the glass cover, pushing its front

HGJHUPOLQWRWKHIURQWIUDPHFKDQQHO and gently lowering the back into place.

Replace the drawers.

About the automatic ice maker

A newly-installed refrigerator may take 1224 hours to begin making ice.

Feeler Arm

Power Switch

Avoid contact with the moving parts of the ejector mechanism, or with the heating element (located on the bottom of the ice maker) that releases the

FXEHV'RQRWSODFHQJHUVRUKDQGVRQWKH automatic ice making mechanism while the refrigerator is plugged in.

Automatic Ice maker (on some models).

The ice maker will produce approximately

70-100 cubes in a 24-hour period, depending on the freezer compartment temperature, room temperature, number of door openings and other use conditions.

If the refrigerator is operated before the water connection is made to the ice maker, set the switch OFF.

When the refrigerator has been connected to the water supply, set the switch ON position.

7KHLFHPDNHUZLOOOOZLWKZDWHUZKHQLWFRROVWR

15F. A newly-installed refrigerator may take 12 to

24 hours to begin making ice cubes.

Once the ice maker starts to make ice, it may take

XSWRKRXUVWROOWKHELQGHSHQGLQJRQWKH temperature settings and number of door openings.

You will hear a buzzing sound each time the ice

PDNHUOOVZLWKZDWHU

NOTICE: 7KURZDZDWKHUVWIHZEDWFKHVRILFH to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

:KHQWKHELQOOVWRWKHOHYHORIWKHIHHOHUDUPWKH ice maker will stop producing ice.

It is normal for several cubes to be joined