GE Profile™ Series 25.9 Cu. Ft. Side-by-Side Refrigerator PSE26KGEWW user guide

Advanced water filtration.
Show OFF. To turn the unit back on, press the FREEZER

TEMP/FRIDGE TEMP pad. Press to set the freezer and refrigerator temperatures to the preset points of 0F (-18C) for the freezer and 37F (3C) for the refrigerator.

When the unit is turned back on, it will take up to 24 hours to stabilize.

The temperature controls are preset in the factory at 37F (3C) for the refrigerator compartment and 0F (-18C) for the freezer compartment.

Allow 24 hours for the temperature to stabilize to the preset recommended settings.

Refrigerator temperatures can be adjusted between 34F and 46F

(1C to 8C), and the freezer temperatures can be adjusted between 6F and +8F (21C to 13C).

Touch-LED Dispenser Control

NOTE: The refrigerator is shipped with protective film covering the temperature controls. If this film was not removed during installation, remove it now.

Performance Air Flow System

The Performance Air-Flow System is designed to maximize temperature control in the refrigerator and freezer compartments. This unique special feature consists of the

Air Tower along the back wall of the refrigerator and the Air

Tunnel on the bottom portion of the freezer rear wall. Placing food in front of the louvers on these components will not affect performance. Although the Air Tower and the Air Tunnel can be removed, doing so will affect temperature performance.

1.800.561.3344.)

About Set Features.

This pad is used to select the following features:

TurboCool, Quick Ice, Door Alarm and Water

Pressing SET FEATURES repeatedly will cycle through all of the available features and then exit the mode. If no key is pressed, the mode will exit and return to displaying features currently set.

About TurboCool.

How it Works

TurboCool rapidly cools the refrigerator compartment in order to more quickly cool foods. Use TurboCool when adding a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.

Once activated, the compressor will turn

on immediately and the fans will cycle on and off at high speed as needed for eight hours. The compressor will continue to run until the refrigerator compartment cools to approximately 34F (1C), then it will cycle on and off to maintain this setting. After 8 hours, or if TurboCool is pressed again, the refrigerator compartment will return to the original setting.

How to Use

Tactile LED Dispenser Control:

Press TurboCool. The TurboCool temperature display will show Tc and the LED will be activated.

After TurboCool is complete, the TurboCool indicator light will go out.

NOTES: The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during TurboCool.

When opening the refrigerator door during

TurboCool, the fans will continue to run if they have cycled on.

Touch-LED Dispenser Controls:

Press SET FEATURES. The refrigerator temperature display will show TurboCool and/or TC. Press ON/OFF.

After TurboCool is complete, the refrigerator compartment will return to the original setting.

The refrigerator temperature cannot be changed during TurboCool.

The freezer temperature is not affected during

TurboCool.

When opening the refrigerator door during

TurboCool, the fans will continue to run if they have cycled on.

About ClimateKeeper2. (on some models)

How it Works

The ClimateKeeper2 is the industrys most advanced refrigeration system, delivering optimum temperature and humidity