The larger slot in the adapter must be aligned with the larger slot in the wall outlet to provide proper polarity in the connection of the power cord.
When disconnecting the power cord from the adapter, always hold the adapter in place with one hand while pulling the power cord plug with the other hand. If this is not done, the adapter ground terminal is very likely to break with repeated use.
If the adapter ground terminal breaks, DO NOT USE the refrigerator until a proper ground has been established.
Attaching the adapter ground terminal to a wall outlet cover screw does not ground the appliance unless the cover screw is metal, and not insulated, and the wall outlet is grounded through the house wiring. You should have the circuit checked by a qualified electrician to make sure the outlet is properly grounded.
Read and follow this Safety Information carefully.
SAVE THESE INSTRUCTIONS
Initially set the fresh food and freezer controls at 5.
For fresh food and freezer, 5 is normal, 9 is coldest.
Line up the setting with the dot.
About the controls on the refrigerator.
If you want colder or warmer temperatures, adjust the fresh food temperature first. When satisfied with that setting, adjust the freezer temperature.
The freezer control maintains the temperature in the freezer compartment.
Fresh Food Control
Moving the fresh food control to OFF stops cooling in both areasfresh food and freezerbut does not shut off power to the refrigerator.
How To Test Temperatures
Use the milk test for the fresh food compartment. Place a container of milk on the top shelf and check it a day later. If the milk is too warm or too cold, adjust the temperature controls.
Use the ice cream test for the freezer compartment. Place a container of ice cream in the center of the freezer and check it after a day. If its too hard or too soft, adjust the temperature controls.
After changing the controls, allow 24 hours for the refrigerator to reach the temperature you have set.
The fresh food control maintains the temperature throughout the fresh food compartment.
When placing food packages in the freezer compartment make sure that they do not prevent the freezer door from fully closing. A partially open freezer door will cause abnormally high temperatures in the freezer compartment resulting in higher energy consumption.
Not all features are on all models.
Bins on the Door
Bins can easily be rearranged or carried from refrigerator to work area.
To remove: Tilt the bin up and pull out on the molded supports until it comes completely out of the door.
The divider helps prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the divider near the front and move it back and forth to fit your needs.
To replace or relocate: Select desired shelf height, engage the bin in the molded supports on the door and slide the bin in.
Bin will hook into place.
Fixed door shelf. To install shelf, push it in, then down to lock it in place.
Fixed Door Shelf
Quick Store Bin
To avoid damaging the refrigerator, make sure the bin is closed and latched before closing the refrigerator door.
This bin can be placed on the fresh food or freezer door.
2 Pull forward
To remove the bin, push up on the thumb tab while lifting the bin up and out of the housing.
Quick Store Bin
To move, lift the bin housing up and out of the supports on the door. You do not have to remove the bin from the housing when moving it.
About the refrigerator shelves, bins and racks.
Rearranging the Shelves
2 Lift up and out
Shelves in the fresh food and freezer compartments are adjustable.
2 Lower to lock in place
Slide-Out Spillproof Shelves
Spillproof shelves have special edges to help prevent spills from dripping to lower shelves. The shelves slide forward and backward for ease of accessibility.
Quick Space Shelf
Removable Wine Rack
This shelf splits in half and slides under itself for storage of tall items on the