Rotate the control dial to
. Flip the Start/Stop up or down to start. When the cycle ends, pour out the soapy water, and rinse the blender jar with warm water.
Unplug the Blender before cleaning. Wipe the Base and the cord with a warm, damp cloth and dry with a soft cloth.
Dishwasher-safe parts, top rack only: Lid, Tamper, and Ingredient-measuring cap.
Dishwasher-safe parts, bottom rack only: Blender Jar.
All parts may also be washed by hand with warm soapy water, and then rinsed with warm water and dried with a soft cloth.
SANITIZING THE BLENDER
1. Empty the blender jar.
2. Prepare a 200 ppm sodium hypochlorite solution* using 1.75 L of hot water in the blender jar. Place the lid on the blender jar, and make sure the blender jar is fully in place on the blender base.
3. Run the Blender on the High Speed setting for 35 seconds.
Flip the Start/Stop up or down to start the Blender.
4. Turn off the Blender and let the sanitizing mix sit in the blender jar for an additional
5. Pour out the sanitizing solution mix. Do not rinse the blender jar.
6. Place the lid on the blender jar. Make sure the empty blender jar is fully in place on the blender base. Run the empty Blender for an additional 10 seconds. Do not rinse the jar after sanitizing.
7. Allow the blender jar to air dry.
*To prepare a 200 ppm sodium hypochlorite solution: use 6.67 ml household bleach
(with a 5.25% sodium hypochlorite concentration) in 1.75 L of hot water.
For detailed information: recipes, and tips on how to use and clean your Stand Blender.
11/18/2019 6:56:22 PM
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
Status indicator light is off while unit is plugged in and On/Off switch is in On (I) position:
After 10 minutes of no activity, the Blender will go into
Sleep mode. Flip the Start/Stop up or down to bring the
Blender back into Standby mode.
Status indicator light is flashing orange color:
Blender stops after continuously running for 6 minutes:
Blender stops while blending:
If the ingredients of a recipe arent blending:
Blender jar overflows:
If the problem cannot be corrected:
Indicates error mode. This can be caused by: using a spatula or any other utensil that could obstruct the blade to freely spin, or having an ice cube or hard food in a location that locks up the blade.
Unplug the Blender and remove the jar from the base, and clear the items. Place the jar back on the base, and then turn on the Blender to continue regular use.
This is normal operation for variable speed functions.
Refer to Blender function guide for details.
If Blender stops prior to the completion of the selected function, contact an authorized service center for assistance.
An air pocket can be created around the blade causing the ingredients to miss the blade. Use the tamper to push ingredients down into the blade.
For certain recipes, adding more liquid may also assist in incorporating the ingredients.
Unplug the Blender and remove the jar pad from the housing to make sure the base is fully dry. The control dial can be detached by pulling it off with force. Wipe dry, and then replace it back.
See the Warranty and Service section. Contact an
Authorized Service Center for assistance.
Do not return the Blender to the retailer retailers do not provide service.
11/18/2019 6:56:22 PM
WARRANTY AND SERVICE
KITCHENAID PRO LINE SERIES TOTAL REPLACEMENT LIMITED
WARRANTY FOR THE 50 UNITED STATES, THE DISTRICT OF
COLUMBIA, PUERTO RICO, AND CANADA
This warranty extends to the purchaser and any succeeding owner for KitchenAid
Pro Line Series Blenders operated in the 50 United States, the District of Columbia,
Puerto Rico, and Canada.
Length of Warranty:
Ten Years from the date of purchase.
KitchenAid Will Pay for Your Choice of:
Hassle-Free Replacement of your Pro Line Series
Blender. See the next page for details on how to arrange for replacement, or call the Customer eXperience Center toll-free at 1-800-832-7173.
The replacement parts and repair labor costs to correct defects in materials and workmanship. Service must be provided by an Authorized KitchenAid Service Center.
Not Pay for:
A. Repairs when your Pro Line Series Blender is used in other than normal single family home use.
B. Damage resulting from accident, alteration, misuse
C. Any shipping or handling costs to deliver your
Pro Line Series Blender to an Authorized Service
D. Replacement parts or repair labor costs for Pro Line
Series products operated outside the 50 United
States, District of Columbia, Puerto Rico, and Canada.
DISCLAIMER OF IMPLIED WARRANTIES IMPLIED WARRANTIES, INCLUDING ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR IMPLIED WARRANTY OF FITNESS
FOR A PARTICULAR PURPOSE, ARE LIMITED TO TEN YEARS OR THE SHORTEST
PERIOD ALLOWED BY LAW. Some states and provinces do not allow limitations on the duration of imp