If your TV has a protection film attached, remove the film and then wipe the TV with a polishing cloth.
PREPARATION
PLASMA TV Models : 42/50PG20**, 42/50/60PG30**
Remote Control Sensor
Power/Standby Indicator
illuminates red in standby mode.
illuminates green when the TV is switched on.
PLASMA TV Models : 42/50PG10**
Remote Control Sensor
Power/Standby Indicator
illuminates red in standby mode.
illuminates green when the TV is switched on.
LCD TV Models :
26/32/37/42LG30**, 32/37/42/47/52LG50**
PREPARATION
Remote Control Sensor
Power/Standby Indicator
illuminates red in standby mode.
illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in
Intelligent Sensor
Adjusts picture according to the surrounding conditions. (32/37/42/47/52LG50** only) the OPTION menu.
Attaching the TV to a desk (Only 26/32/42LG30**, 32/42LG50**)
The TV must be attached to desk so it cannot be pulled in a forward/backward direction, potentially causing injury or damaging the product. Use only an attached screw.
(provided as parts of the product)
To prevent TV from falling over, the TV should be securely attached to the floor/wall per installation instructions. Tipping, shaking, or rocking the machine may cause injury.
PREPARATION
LCD TV Models : 19/22LG30**
PREPARATION
INPUT MENU OK
Remote Control Sensor
Power/Standby Indicator
illuminates red in standby mode.
illuminates blue when the TV is switched on.
Note: You can adjust Power Indicator in the OPTION
LCD TV Models : 19/22LS4D*
POWER INPUT MENU
Remote Control Sensor
Power/Standby Indicator
illuminates red in standby mode.
illuminates green when the TV is switched on.
BACK PANEL INFORMATION
Image shown may differ from your TV.
PREPARATION
VIDEO L/MONO AUDIO R
PLASMA TV Models :
42/50PG10**, 42/50PG20**, 42/50/60PG30**
SERVICE ONLY
HDMI/DVI IN
HDMI/DVI IN
VIDEO L/MONO AUDIO R
VIDEO L/MONO AUDIO R
Only 42/50PG10**
VIDEO L/MONO AUDIO R
Power Cord Socket
This TV operates on an AC power. The voltage is indicated on the Specifications page. Never attempt to operate the TV on DC power.
RGB/DVI Audio Input
Connect the audio from a PC or DTV.
OPTICAL DIGITAL AUDIO OUT
Connect digital audio from various types of equipment.
Note: In standby mode, these ports do not work.
Euro Scart Socket (AV1/AV2)
Connect scart socket input or output from an external device to these jacks.
HDMI Input
Connect a HDMI signal to HDMI IN. Or DVI (VIDEO) signal to HDMI/DVI port with DVI to HDMI cable.
