ResMed S9 VPAP S Sleep Apnea Machine user guide

1. Remove the air filter cover from the back of the VPAP device.

2. Remove and discard the old air filter.

3. Insert a new ResMed air

Air filter cover filter ensuring that it is sitting flat in the air filter cover.

4. Replace the air filter cover.

Ensure the air filter and air filter cover are fitted at all

Do not wash the air filter. The air filter is not washable or reusable.

Air filter

An SD card has been supplied to gather therapy data from your VPAP device and provide settings updates from your clinician. When instructed to do so, disconnect the VPAP device from the power outlet, remove your SD card, insert it in the protective folder and send it to your clinician.

Removing the card

1. Push in the SD card to release it.

2. Remove the card.

3. Insert the card into the protective folder.

4. Send the protective folder back to your clinician as instructed.

For more information on removing and inserting your card refer to the SD Card

Protective Folder provided with your device. Please retain the

SD Card Protective Folder for future use.

For Troubleshooting information refer to the Information Guide.

For more product information

368698/2 2013-01

S9 VPAP ST / S9 VPAP S

VPAP ST

POSITIVE AIRWAY PRESSURE DEVICE

Manufacturer: ResMed Ltd 1 Elizabeth Macarthur Drive Bella Vista NSW 2153 Australia. Distributed by: ResMed Corp 9001

Spectrum Center Boulevard San Diego CA 92123 USA.

ResMed (UK) Ltd 96 Milton Park Abingdon Oxfordshire OX14 4RY

S9, H5i, ClimateLine, SlimLine, SmartStart and VPAP are trademarks of ResMed Ltd. S9, ClimateLine, SlimLine, SmartStart and VPAP

2013 ResMed Ltd.

Global leaders in sleep and respiratory medicine

Welcome Guide

English Deutsch Franais Italiano

Espaol Portugus Nederlands

Polski Trke