Star Micronics CBM-820 Printer user guide

Digt werden.

Schlitze und ffnungen im Gehuse, in der Rckwand und im Boden dienen der Belftung. Sie drfen keinesfalls zugedeckt oder blockiert werden, da sich der Drucker sonst berhitzt. Drucker nicht auf ein Bett, Sofa, Teppich oder dergleichen stellen. Drucker nicht in der Nhe eines

Heizkrpers aufstellen. Drucker darf nicht eingebaut werden, falls nicht fr ausreichende

Belftung gesorgt ist.

Drucker nur mit der auf dem Typschild angegebenen Spannung betreiben. Wenn Sie sich nicht sicher sind, fragen Sie ihren Hndler oder ihr zustndiges Elektrizittswerk.

Nichts auf das Stromanschlukabel stellen. Kabel mu so verlegt werden, da man nicht darauftreten kann.

Ein etwaiges Verlngerungskabel mu der Stromstrke aller daran angeschlossenen Gerte entsprechen.

Keine Gegenstnde in die Gehuseschlitze schieben.

Drucker darf nur da gewartet werden, wo im Handbuch angegeben, ffnen und. Abnehmen von

Abdeckungen, die mit Do not remove gekennzeichenet sind, knnte gefhrliche spannungfhrende Stellen oder sonstige Gefahrenpunkte freilegen. Die Wartung solcher Stellen darf grundstzlich nur von besonders ausgebildetem Fachpersonal vorgenommen werden.

A. Wenn das Stromanschlukabel oder der Stecker beschdigt oder durch-gescheuert ist.

B. Wenn Flssigkeit auf dem Drucker verschttet wurde.

C. Wenn der Drucker im Regen gestanden hat oder Wasser darauf verschttet wurde.

D. Wenn der Drucker trotz genauer Befolgung der Betriebsvorschriften nicht richtig arbeitet. Nur die in der Bedienungsanleitung angegebenen Einstellungen vornehmen. Ein Verstellen anderer

Bedienungselemente knnte den Drucker beschdigen und macht umstndliche Arbeiten eines qualifizierten Technikers erforderlich, um den Drucker Wieder auf den normalen Betrieb einzustellen.

E. Wenn der Drucker heruntergefallen ist oder das Gehuse beschdigt wurde.

F. Wenn der Drucker in seiner Leistung nachlt.

Bitte halten Sie den Kunststoffbeutel, in den die Ware verpackt ist, von Kindern entfernt, oder werfen Sie ihn weg, damit er nicht in die Hande von Kindern gert. Das berstlpen des Beutels kann zum Ersticken fhren.

Lrmemission kleiner 70 dBA

IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It has been tested and found to comply with the limits for a Class A computing device pursuant to Subpart J of Part 15 off FCC Rules, which are designed to provide reasonable protection against such interference when operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.

CAUTION: Use shielded cable for this equipment.

Sicherheitshinweis

Die Steckdose zum Anschlu dieses Druckers mu nahe dem Grt angebracht und leicht zugnglich

For Uses in Canada

This digital apparatus does not exceed the class A limits for radio noise emissions from digital, apparatus, as set out in the radio interference regulations of the Canadian department of communications.

Pour Lutilisateurs Canadiens

Cet appareil numrique ne dpasse pas les limites de cargorie a pour les missions de bruit radio

manant d'appareils numriques, tel que prvu dans les rglements sur l'interfrence radio du dpartment Canadien des communications.

< CAUTIONS >

1. Prior to using the equipment, be sure to read this Users Manual thoroughly. Please keep it handy for reference whenever it may be needed.

2. The information contained herein may be changed without prior notice.

3. Reproduction of part or all of this Users Manual without permission is strictly prohibited.

4. Never service, disassemble, or repair parts that are not mentioned in this Users Manual.

5. Note that we will not be responsible for damages attributable to a users incorrect operation/ handling or an improper operating environment.

6. Operate the equipment only as described in this Users Manual; otherwise accidents or problems may

7. Data are basically temporary; they cannot be stored or saved permanently or for a long time. Please note that we will not be responsible for damages or losses of profit resulting from losses of the data attributable to accidents, repairs, tests, and so on.

8. If you have any questions or notice any clerical errors or omissions regarding the information in this manual, please contact our office.

9. Please note that, notwithstanding Item 8 above, we will not be responsible for any effects resulting from operation of the equipment.

Citizen and Citizen logo are registered trademarks of Citizen Watch Co., Ltd.

ESC/POS and TM-295 are trademarks of Seiko Epson Co., Ltd.

Auto Side Loading is a trademark of Star Micronics Co., Ltd.

Windows codepage is a registered trademark of Microsoft Corporation.

SAFETY PRECAUTIONS ... BE SURE TO OBSERVE

In order to prevent hazards to an operator or other persons and damage to property, be sure to observe the following precautions.

The following describes the degrees of hazard and damages that can occur if the given instructions are neglected or the equipment is incorrectly operated.

Negligence of this precaution may result in death or serious injury.

Negligence of this precaution may result in injury or damage to

This is an illustration mark used to alert your attention.

This is an illustration mark used to indicate such information as an instruction or the like.

Never handle the equipment in the following manners, as it may break, become out of order, or overheat causing smoke and resulting in fire or electric shock.

If the equipment is used in an abnormal condition, such as when broken, then problems, smoke emission, abnormal odor/noise, and fire can result. If an abnormal condition exists, be sure to disconnect the power plug from a plug socket, and contact our dealer. Never repair the equipment on your own - it is very dangerous.

Do not allow the equipment to receive a strong impact or shock, such as kicking, stomping, hitting, dropping, and the like.

Install the equipment in a well-ventilated place. Do not use it in such a manner that its ventilation port will be blocked.

Do not install the equipment in a place like a laboratory where chemical reactions are expected, or in a place where salt or gases are contained in the air.

Do not connect/disconnect a power cord or a data cable, while holding the cable. Do not pull, install, use, or carry the equipment in such a manner that force will be applied to the cables.

Do not drop or insert any foreign substances, such as clips or pins, into the equipment.

Do not spill any liquid or spray any chemical-containing liquid over the equipment. If any liquid is spilled on it, turn off the power, disconnect the power cable and power cord from the plug socket, and so on, and contact our dealer.

Never disassemble or remodel the equipment. Negligence of this may cause fire or electric shock.

Use the equipment only with the specified commercial power supply and AC adapter. Negligence of this may result in fire, electric shock, or problems.

If you drop or break the AC adapter, or if water or the like gets inside it, unplug it immediately from the socket and contact your dealer.

Do not damage, break, process, bend/pull by force, twist, or head an AC adapter cord. Also, do not put a heavy substance on it or heat it. The AC adapter cord could be broke